{"title":"REVE D Parts","description":"","products":[{"product_id":"rdx-rear-sway-bar-set-contains-2-types-of-wire","title":"REVE D RDX Rear Sway bar set (Contains 2 types of wire)","description":"\u003cp\u003eRDX Rear Sway bar set (Contains 2 types of wire)\u003c\/p\u003e\n\u003cp\u003eREVE D RDX REAR SWAY BAR SET (Contains 2 types of wire)(D1-412RS)\u003c\/p\u003e\n\u003cp\u003eA new rear sway bar set for the RDX is now available!\u003cbr\u003eThis product moderately controls roll during drifting, greatly improving traction and stability around the rear, allowing for more powerful drift control.\u003cbr\u003eThe product includes Φ0.8mm and Φ1.0mm sway bar wires, as well as a dedicated gear case cap, sway bar rod, sway bar ball, and everything else you need to install it on the RDX.\u003cbr\u003eA 1.2mm sway bar wire is also available as an optional part, and can be used in a wide range of situations, from low-grip courses to courses with relatively high grip.\u003c\/p\u003e\n\u003cp\u003ePlease try this rear sway bar set that improves the traction performance of the RDX!\u003c\/p\u003e\n\u003cp\u003e※Cannot be used simultaneously with RD-020-26 HT rear lower arm (42mm, caster angle 2.6 degrees).\u003cbr\u003eWhen using the lower arm with a caster angle of 2.6 degrees at the same time, please prepare the RD-022-26 HT rear lower arm (42 mm, caster angle of 2.6 degrees) separately.\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42313655156807,"sku":"D1-412RS","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-412rs_re_re_575_380-575x380.jpg?v=1766174646"},{"product_id":"rdx-spm-titanium-king-pin-2pcs","title":"REVE D RDX SPM Titanium King Pin (2pcs.)","description":"\u003cp\u003eRDX SPM Titanium King Pin (2pcs.)\u003c\/p\u003e\n\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eREVE D RDX SPM TITANIUM KING PIN (2pcs.)(D1-414T)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is SPM (Super Precision Machine Cut) Titanium kingpin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe have commercialized a kingpin for bell cranks using lightweight\/highly rigid titanium material and high-precision cutting. Can be attached to the \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-202a\" rel=\"noopener\" target=\"_blank\"\u003ealuminum bell crank set for D1-202A RDX\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, or used as a replacement part for RDX genuine bell crank,\u003c\/span\u003e\u003cspan\u003e \u003ca href=\"https:\/\/teamreved.com\/product\/d1-202g\" rel=\"noopener\" target=\"_blank\"\u003egraphite resin bell crank for D1-202 RDX\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/rd-014bc-sr\" rel=\"noopener\" target=\"_blank\"\u003eRD-014BC\/SR SG bell crank set\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 pieces\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42313655189575,"sku":"D1-414T","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-414t_575_380-575x380.jpg?v=1766173931"},{"product_id":"rdx-molded-spur-gear-48-84t","title":"REVE D RDX Molded Spur Gear 48\/84T","description":"\u003cp\u003eRDX Molded Spur Gear 48\/84T \u003c\/p\u003e\n\u003cp\u003eREVE D RDX Molded Spur Gear 48\/84T(D1-SG4884)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eResin spur gear for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRDX standard spur gear with 48 pitch \/ 84T.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease use it as a replacement part when it is damaged.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42313655287879,"sku":"D1-SG4884","price":6.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-sg4884.jpg?v=1766172966"},{"product_id":"alu-suspension-mount-6-57-2-60-4mm-se","title":"REVE D Alu. Suspension Mount #6 (57.2~60.4mm) SE (RD-301-6)","description":"\u003cp\u003eAlu. Suspension Mount #6 (57.2~60.4mm) SE\u003c\/p\u003e\n\u003cp\u003eREVE D ALUMINUM SUSPENSION MOUNT #6 SE (57.2~60.4mm)(RD-301-6)\u003c\/p\u003e\n\u003cp\u003eThe lightweight and highly rigid aluminum suspension mount series SE(Shiny Edge) spec!\u003cbr\u003eThe lineup includes a total of 7 types, from #1 with the shortest length of 39.2mm to #7 with the longest length of 64.0mm.\u003cbr\u003eThe aluminum suspension mount, which is lightweight yet highly rigid, does not cause alignment changes even when a load is applied while driving, and the suspension movement is more precise, achieving stable traction.\u003cbr\u003e＜Line-up＞\u003cbr\u003e◆RD-301-1：Alu. Suspension mount＃1（39.2～42.4mm）\u003cbr\u003e◆RD-301-2：Alu. Suspension mount＃2（42.8～46.0mm）\u003cbr\u003e◆RD-301-3：Alu. Suspension mount＃3（46.4～49.6mm）\u003cbr\u003e◆RD-301-4：Alu. Suspension mount＃4（50.0～53.2mm）\u003cbr\u003e◆RD-301-5：Alu. Suspension mount＃5（53.6～56.8mm）\u003cbr\u003e◆RD-301-6：Alu. Suspension mount＃6（57.2～60.4mm）\u003cbr\u003e◆RD-301-7：Alu. Suspension mount＃7（60.8～64.0mm）\u003cbr\u003e※ Please use the dedicated suspension bush, \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-rd-300bs?_pos=1\u0026amp;_sid=6ad5f397d\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003eRD300-BS (Plastic suspension mount bush)\u003c\/a\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42313655386183,"sku":"RD-301-6","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-301_575_380-575x380_5.jpg?v=1766171982"},{"product_id":"d1-ks50","title":"Reve D RDX Alu. Knuckle Stopper 5.0mm (2pcs)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eReve D RDX Alu. Knuckle Stopper 5.0mm (2pcs)(D1-KS50)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an aluminum knuckle stopper with a diameter of 5.0mm for the RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe length has been optimized for the RDX, which installs the stopper on the top of the front knuckle.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith a smooth surface finish that doesn’t interfere with suspension movement and lightweight aluminum, this knuckle stopper is a must-try.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372071456839,"sku":"D1-KS50","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-ks50_575_380.jpg?v=1768168598"},{"product_id":"d1-ks55","title":"Reve D RDX Alu. Knuckle Stopper 5.5mm (2pcs)","description":"\u003cp\u003eReve D RDX Alu. Knuckle Stopper 5.5mm (2pcs)(D1-KS55)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an aluminum knuckle stopper Φ5.5mm for the RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis stopper size is the standard size used for the MC-III conversion kit.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe length has been optimized for the RDX, which mounts the stopper on the top of the front knuckle.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith a smooth surface finish that doesn't interfere with suspension movement and lightweight aluminum, this knuckle stopper is a must-try.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372071489607,"sku":"D1-KS55","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-ks55_575_380.jpg?v=1768168562"},{"product_id":"rc-a4605","title":"Reve D Alu. Spacers (4×6, 0.5mm, 8pcs)","description":"\u003cp\u003eReve D \u003cspan\u003ePrecision aluminum spacers engineered for RC enthusiasts who demand exact tolerances. These Φ4×Φ6mm spacers deliver reliable performance in demanding applications, featuring a slim 0.5mm height that fits seamlessly into tight assembly spaces. Crafted from durable aluminum, they resist corrosion while maintaining lightweight characteristics essential for high-performance RC builds. Perfect for suspension tuning, drivetrain adjustments, and custom configurations where accuracy matters.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072177735,"sku":"RC-A4605","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/RC-A4605_575_C3_97380_500x_c0b3523b-d2db-44bc-8259-de6fbff3b03a.webp?v=1772829024"},{"product_id":"rc-a4610","title":"Reve D Alu. Spacers (4×6, 1.0mm, 8pcs)","description":"\u003cp\u003e\u003cspan\u003eReve D Precision aluminum spacers engineered for RC enthusiasts who demand exact tolerances. These Φ4×Φ6mm spacers deliver reliable performance in demanding applications, featuring a compact 1.0mm height that fits seamlessly into tight assembly spaces. Crafted from durable aluminum, they resist corrosion while maintaining lightweight characteristics essential for high-performance RC builds. Perfect for suspension tuning, drivetrain adjustments, and custom configurations where accuracy matters.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072210503,"sku":"RC-A4610","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/RC-A4610_575_C3_97380_1_500x_d7496f8b-038b-47a2-bdfd-eefee558c130.webp?v=1772828945"},{"product_id":"rc-bh204","title":"Reve D M2×4mm BH Screws (8pcs)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eReve D M2×4mm BH Screws (8pcs)(RC-BH204)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are M2 x 4mm button head screws.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThey can be used for the MC-III body mount, etc., and can also be used as general-purpose parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8pcs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072243271,"sku":"RC-BH204","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-bh204_575_380.jpg?v=1768167355"},{"product_id":"rc-pt-280","title":"Reve D Alu. Post (6×28mm, 2pcs.)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eReve D Alu. Post (6×28mm, 2pcs.)(RC-PT-280)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an aluminum Φ6.0mm x 28mm post.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn addition to connecting the MC-III main chassis and upper deck, it can also be used as a general-purpose 28mm post.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt has ribs that allow for the attachment of P4 size O-rings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis product comes with 2 pcs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072276039,"sku":"RC-PT-280","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-pt-280_575_380.jpg?v=1768167293"},{"product_id":"rc-r-p3b","title":"Reve D O-ring P3 (Black, 4pcs.)","description":"\u003cp\u003eReve D O-ring P3 (Black, 4pcs.)(RC-R-P3B)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese O-rings can be used with RDX and MC-III battery holders.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product contains four black O-rings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse as a repair part.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072308807,"sku":"RC-R-P3B","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-r-p3b_575_380.jpg?v=1768163575"},{"product_id":"rc-r-p4b","title":"Reve D O-ring P4 (Black, 4pcs.)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eReve D O-ring P4 (Black, 4pcs.)(RC-R-P4B)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese O-rings are sized to be used with the MC-III’s aluminum posts (battery fixing parts).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product contains four black O-rings.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse as a repair part.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072341575,"sku":"RC-R-P4B","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-r-p4b_575_380.jpg?v=1768163512"},{"product_id":"rc-ss303h","title":"Reve D M3×3mm Set Screw (Flat point, 10pcs.)","description":"\u003cp\u003eReve D M3×3mm Set Screw (Flat point, 10pcs.)(RC-SS303H)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a series of M3-sized flat-tip set screws.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThey can be used to secure pinion gears and suspension pins.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse them as repair parts.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072374343,"sku":"RC-SS303H","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-ss303h_575_380.jpg?v=1768163468"},{"product_id":"rc-ss304h","title":"Reve D M3×4mm Set Screw (Flat point, 10pcs.)","description":"\u003cp\u003eReve D M3×4mm Set Screw (Flat point, 10pcs.)(RC-SS304H)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is a series of M3-sized flat-tip set screws.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThey can be used to secure pinion gears and suspension pins.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUse them as repair parts.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42372072407111,"sku":"RC-SS304H","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-ss304h_575_380.jpg?v=1768163319"},{"product_id":"d1-016r-1","title":"Reve D RDX FIXING MAGNET REAR BODY MOUNT SET","description":"\u003cp\u003eREVE D RDX FIXING MAGNET REAR BODY MOUNT SET (D1-016R)\u003c\/p\u003e\n\u003cp\u003eRDX rear body mount set for fixing RDX magnets!\u003c\/p\u003e\n\u003cp\u003eThis product is a set of a carbon rear body mount plate and aluminum rear body mount posts that can be attached to RDX, together with the mounting screws. rear shock tower, it is possible to fix the body using a commercially available magnet. There are 4 holes in the aluminum post, 3 holes in the carbon plate, and 8 holes on each side for fixing the magnet, so you can adjust the position according to your body shells.\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42484971339847,"sku":"D1-016R","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-016r_575_380-575x380.jpg?v=1770319025"},{"product_id":"d1-202a","title":"Reve D RDX Aluminum Bell Crank Set","description":"\u003cp\u003eREVE D RDX ALUMINUM BELL CRANK SET(D1-202A)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an Aluminum bell crank set for RDX!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe use of lightweight and highly rigid aluminum material greatly increases the rigidity of the front area. By increasing the rigidity of the material itself and installing a bell crank that has been processed with high precision, the steering response performance will also become sharper.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSE (Shiny Edge) processing is applied to each edge to improve the sense of luxury.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product is a set of center link and bell crank (left and right) and has the same shape as the genuine parts, so you can experience improved performance just by installing it without any troublesome settings. To fully enjoy the performance of this product, we recommend installing the highly precisely machined D1-414T SPM titanium king pin !\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42484971372615,"sku":"D1-202A","price":81.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-202a_575_380-575x380.jpg?v=1770318825"},{"product_id":"rd-301-7","title":"REVE D ALUMINUM SUSPENSION MOUNT #7 SE (60.8~64.0mm)(RD-301-7)","description":"\u003ch1 class=\"page-title\"\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eREVE D ALUMINUM SUSPENSION MOUNT #7 SE (60.8~64.0mm)(RD-301-7)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eREVE D ALUMINUM SUSPENSION MOUNT #7 SE (60.8~64.0mm)(RD-301-7)\u003c\/p\u003e\n\u003cp\u003eThe lightweight and highly rigid aluminum suspension mount series SE(Shiny Edge) spec!\u003cbr\u003eThe lineup includes a total of 7 types, from #1 with the shortest length of 39.2mm to #7 with the longest length of 64.0mm.\u003cbr\u003eThe aluminum suspension mount, which is lightweight yet highly rigid, does not cause alignment changes even when a load is applied while driving, and the suspension movement is more precise, achieving stable traction.\u003cbr\u003e＜Line-up＞\u003cbr\u003e◆RD-301-1：Alu. Suspension mount＃1（39.2～42.4mm）\u003cbr\u003e◆RD-301-2：Alu. Suspension mount＃2（42.8～46.0mm）\u003cbr\u003e◆RD-301-3：Alu. Suspension mount＃3（46.4～49.6mm）\u003cbr\u003e◆RD-301-4：Alu. Suspension mount＃4（50.0～53.2mm）\u003cbr\u003e◆RD-301-5：Alu. Suspension mount＃5（53.6～56.8mm）\u003cbr\u003e◆RD-301-6：Alu. Suspension mount＃6（57.2～60.4mm）\u003cbr\u003e◆RD-301-7：Alu. Suspension mount＃7（60.8～64.0mm）\u003cbr\u003e※ Please use the dedicated suspension bush, \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-rd-300bs?_pos=1\u0026amp;_sid=6ad5f397d\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003eRD300-BS (Plastic suspension mount bush)\u003c\/a\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42484971405383,"sku":"RD-301-7","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-301t_type-tk_575_380-575x380-1.jpg?v=1770318762"},{"product_id":"d1-503i","title":"Reve D RDX Molded Idler Gear 28T","description":"\u003cp\u003eREVE D RDX Molded Idler Gear 28T(D1-503I)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlastic idler gear for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease use it as a replacement part when it is damaged.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 piece included\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e※Two of these products are required for RDX\/MC-1.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42484971536455,"sku":"D1-503I","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-503i.jpg?v=1770318401"},{"product_id":"reve-d-steel-bone-for-universal-drive-shaft-44-5mm-1pcus-b445s","title":"REVE D STEEL BONE FOR UNIVERSAL DRIVE SHAFT (44.5mm, 1PC)(US-B445S)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eREVE D STEEL BONE FOR UNIVERSAL DRIVE SHAFT (44.5mm, 1PC)(US-B445S)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e44.5mm iron bone that can be used for \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-us-s470s?_pos=1\u0026amp;_sid=98fb5ff12\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eUS-S470S\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003euniversal shafts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy replacing the 47.0mm bone that is standard on the RDX, it is possible to adjust the length when narrowing the rear tread or when using a diff gear made by another company with a protector.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 piece\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42523582627911,"sku":"US-B445S","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/us-b445s.jpg?v=1771096266"},{"product_id":"bingo-rc-designs-battery-holder-for-the-reve-d-rdx","title":"Bingo RC Designs Battery Holder for the Reve D RDX","description":"\u003cdiv class=\"card__header\"\u003e\n\u003ch2 class=\"card__title heading h3\"\u003eDescription\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"card__section\"\u003e\n\u003cdiv class=\"rte text--pull\"\u003e\n\u003cp\u003eIntroducing the new magnetic battery tray for the Reve D RDX. Featuring quick change arms and a sleek finish.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e-Light weight design\u003c\/p\u003e\n\u003cp\u003e-Battery is held in place with magnetic arms.\u003c\/p\u003e\n\u003cp\u003e-Fits shorty packs. Heights from 19mm to 25mm\u003c\/p\u003e\n\u003cp\u003e-Fits the Bingo WASP MAX Chassis Only!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 30-35g (Dependent on color)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery retainers\u003c\/li\u003e\n\u003cli\u003eTop deck\u003c\/li\u003e\n\u003cli\u003eMagnetic arms\u003c\/li\u003e\n\u003cli\u003eAlum. spacer\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BINGO","offers":[{"title":"Forged Red","offer_id":42535094222919,"sku":"BRC-RDX-BATT-FR","price":69.0,"currency_code":"USD","in_stock":false},{"title":"Forged Purple","offer_id":42535094255687,"sku":"BRC-RDX-BATT-FP","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Forged Blue","offer_id":42535094288455,"sku":"BRC-RDX-BATT-FB","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/forgedred.webp?v=1771634370"},{"product_id":"reve-d-d1-008flm","title":"Reve D RDX Molded Front Lower Arm","description":"\u003cp\u003eREVE D RDX Molded Front Lower Arm(D1-008FLM)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is a plastic front lower arm for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA set of lower arms left and right and plastic knobs to be attached to the lower suspension pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease use it for repair when it is damaged.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539280924743,"sku":"D1-008FLM","price":8.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-008flm.jpg?v=1772828782"},{"product_id":"reve-d-d1-008fug","title":"Reve D RDX Molded Graphite Front Upper Arm (D1-008FUG)","description":"\u003cp\u003eReve D RDX Molded Graphite Front Upper Arm (D1-008FUG)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFront upper arm made of graphite is ready for RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front upper arm, which combines graphite with resin, promotes weight reduction and rigidity improvement around the front, which is important for RWD drift, and greatly improves suspension responsiveness\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e. the rigidity of the material itself, the precision of the parts has been further improved, and the change in shape when a load is applied is suppressed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eproduct has the same shape as the genuine part, it is easy to install and there is no need to change the setting.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease try the graphite molded front upper arm for RDX, which is lightweight and highly rigid and improves the suspension performance of RDX!\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539280957511,"sku":"D1-008FUG","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-008fug_575_380-575x380.jpg?v=1775664122"},{"product_id":"reve-d-d1-010f","title":"REVE D RDX Steel Front Axle (2pcs.)(D1-010F)","description":"\u003cp\u003eREVE D RDX Steel Front Axle (2pcs.)(D1-010F)\u003c\/p\u003e\n\u003cdiv class=\"post clearfix\"\u003e\n\u003cp\u003e\u003cspan\u003eSteel front axle for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease use it for repair when it is damaged.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 pieces\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539281088583,"sku":"D1-010F","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-010f.jpg?v=1775753863"},{"product_id":"reve-d-d1-010fa","title":"Reve D RDX Aluminum Front Axle (4.0, 2pcs.) (D1-010FA)","description":"\u003cp\u003eREVE D RDX ALUMINUM FRONT AXLE (4.0, 2pcs.)(D1-010FA)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an Aluminum front axle for RDX!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy using lightweight and highly rigid aluminum material and integrating the highly precisely machined wheel hub with the axle, core shakes and play are minimized, and the “front rolling” that is essential for RWD drifting is greatly improved. All the edges are treated with SE (Shiny Edge) to improve the sense of luxury. The wheel offset is 4.0mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFor the offset adjustment, \u003ca href=\"https:\/\/teamreved.com\/product\/rd-005s2\" rel=\"noopener\" target=\"_blank\"\u003eRD-005S2 2.0mm wheel spacer for ASL front axle\u003c\/a\u003e can be installed as well.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539281121351,"sku":"D1-010FA","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-010fa_575_380_2-575x380.jpg?v=1775225637"},{"product_id":"reve-d-d1-010fa2","title":"Reve D RDX Alu. Front 2mm Axle for D1-MK-B2 (2pcs.)..","description":"\u003cp\u003eReve D RDX Alu. Front 2mm Axle for D1-MK-B2 (2pcs.)(D1-010FA2)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is an Aluminum front axle 2.0mm for RDX!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy using lightweight and highly rigid aluminum material and integrating the highly precisely machined wheel hub with the axle, core shakes and play are minimized, and the “front rolling” that is essential for RWD drifting is greatly improved. All the edges are treated with SE (Shiny Edge) to improve the sense of luxury.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy simultaneously installing the \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b2\" rel=\"noopener\" target=\"_blank\"\u003ealuminum front axle (2.0mm type) for the D1-MK-B2\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e , you can compensate for the increased 2mm scrub radius of the knuckle and match the base offset value of the Multi-Select Front Knuckle to 4.0mm. Additionally, pairing the 2.0mm type axle with the conventional \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003eMulti-Select Knuckle\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eallows you to run deep-dish or high-offset wheels on the front, achieving a stylish look without compromising performance. *Please note that compatible wheels are limited.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539281154119,"sku":"D1-010FA2","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-010fa2_1_575_380.jpg?v=1772828729"},{"product_id":"reve-d-d1-011r50","title":"Reve D RDX EZ Type Wheel Hub 5.0mm (D1-011R50)","description":"\u003cp\u003eREVE D RDX EZ Type Wheel Hub 5.0mm(D1-011R50)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is an aluminum EZ type wheel hub that can be attached to the RDX Φ6.0mm rear axle!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompared to the resin rear hub that comes standard with the kit, the use of aluminum improves the accuracy, and by combining it with the Φ6.0mm axle used in the RDX, it effectively suppresses core shake and enables smooth rotation. It will come true.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn addition, by holding down the pin that secures the hub with an O-ring, the vibration of the pin is reduced and the rotation is stabilized.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe lineup is available in two types, 5.0mm and 7.0mm (kit standard resin wheel hub is 5.5mm).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also have aluminum wheel spacers that can be used for maintenance set and tread fine adjustment.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease try the EZ type wheel hub to further evolve the running of RDX.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539281350727,"sku":"D1-011r50","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-011r50.jpg?v=1772828671"},{"product_id":"reve-d-d1-016bm","title":"Reve D RDX Molded Body Post Mount (D1-016BM)","description":"\u003cp\u003eREVE D RDX Molded Body Post Mount(D1-016BM)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA set of plastic body post mounts for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe set includes a front body mount plate, body mount base, 2 body mount base posts, and 2 rear body mount stays.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy attaching the body mount base to the RDX upper suspension mount, it can also be used as a magnet mount base.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539281711175,"sku":"D1-016BM","price":9.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-016bm.jpg?v=1780671803"},{"product_id":"reve-d-d1-016f","title":"Reve D Reve D RDX Aluminum Front Post (For Magnet Mount)","description":null,"brand":"6","offers":[{"title":"Default Title","offer_id":42539281743943,"sku":"D1-016F","price":12.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-016f_575_380-575x380.jpg?v=1773863080"},{"product_id":"reve-d-d1-300fm","title":"Reve D RDX Molded Front Sus Mount","description":"\u003cp\u003eREVE D RDX Molded Front Sus Mount(D1-300FM)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is a set of plastic front upper suspension mount and lower suspension mount for [RDX].\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy adopting a high-rigidity resin mixed with glass, it is resistant to deflection and impact and maximizes the function of the suspension\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539283546183,"sku":"D1-300FM","price":8.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-300fm.jpg?v=1772828620"},{"product_id":"reve-d-d1-412w2","title":"Reve D RDX Sway bar wire 1.2mm (D1-412W2)","description":"\u003cp\u003eREVE D RDX SWAY BAR WIRE 1.2mm(D1-412W2)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptional Φ1.2mm stabilizer wire that can be used with the rear stabilizer set for D1-412RS RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIdeal for use on roads with relatively high grip such as black plastic tiles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1pc.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539284201543,"sku":"D1-412W2","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-412w2_re_575_380-575x380.jpg?v=1780669810"},{"product_id":"reve-d-d1-415bs","title":"Reve D Aluminum ball bearing spacer (2pcs)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cspan\u003eAluminum bearing spacer for RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy replacing the resin bearing spacer of the rear hub carrier and using it, it holds the 1060 bearing with higher accuracy.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2pcs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539284234311,"sku":"D1-415BS","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-415bs.jpg?v=1772828589"},{"product_id":"reve-d-d1-415fg","title":"Reve D RDX Graphite Front Knuckle","description":"\u003cp\u003eREVE D RDX Graphite Front Knuckle (D1-415FG) \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGraphite resin front knuckle for RDX. By blending graphite into the resin, it becomes lighter and more rigid than the genuine glass-blended front\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eknuckle, effectively balancing the weight reduction and rigidity increase around the front, which is important for RDW drift.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ethe rigidity of the material itself and improving the precision of the parts, the front rolling and steering feel will be more direct.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe product is a set of front knuckles (left and right) and has the same shape as the genuine parts, so you can experience the performance improvement just by installing without troublesome settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e※The product is stamped with a G for identification purposes.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539284299847,"sku":"D1-415fg","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-415fg_575_380-575x380.jpg?v=1772828560"},{"product_id":"reve-d-d1-644","title":"Reve D REVE D RDX\/MC-1 ALUMINUM SPUR GEAR HOLDER SET (D1-644)","description":"\u003cp\u003e\u003cspan\u003eREVE D RDX\/MC-1 ALUMINUM SPUR GEAR HOLDER SET(D1-644)\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539285217351,"sku":"D1-644","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-644_575_380-575x380.jpg?v=1772828532"},{"product_id":"reve-d-d1-ks45","title":"Reve D RDX Alu. Knucle Stopper 4.5mm 2 pcs)","description":null,"brand":"6","offers":[{"title":"Default Title","offer_id":42539285971015,"sku":"D1-KS45","price":5.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-ks30_35_40_45_4.jpg?v=1778529958"},{"product_id":"reve-d-d1-mk-b","title":"Reve D RDX Multi-select Front Knuckle (Base) D1-MK-B","description":"\u003cp\u003eREVE D RDX MULTI-SELECT FRONT KNUCKLE(Base)(D1-MK-B)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the base part for the aluminum Multi-Select front knuckle for the RDX! This\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003elightweight and highly rigid aluminum front knuckle has a two-part structure consisting of the knuckle body and a plate attached to the top. By attaching various interchangeable plates to the top, you can instantly change the settings and driving character to suit the course.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e*The product is a knuckle base part that includes one each for the left and right.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e*A separate aluminum knuckle plate for the Multi-Select front knuckle is required to install on the RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e■Plate part\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-ph?pr_prod_strat=e5_desc\u0026amp;pr_rec_id=9f5037437\u0026amp;pr_rec_pid=7459698573383\u0026amp;pr_ref_pid=7459698606151\u0026amp;pr_seq=uniform\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003eD1-MK-PH: Aluminum knuckle plate for RDX Multi-Select front knuckle (HIKARU)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539286003783,"sku":"D1-MK-B","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-mk-b_3_575_380-575x380_1.jpg?v=1773864152"},{"product_id":"reve-d-d1-mk-b2","title":"Reve D RDX Multi-select Front Knuckle (2mm offset, Base)..","description":"\u003cp\u003eReve D RDX Multi-select Front Knuckle (2mm offset, Base)(D1-MK-B2)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the base part of the aluminum multi-select front knuckle 2.0mm offset type for RDX !\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBy offsetting the bearing position 2mm toward the wheel center, the rotation axis moves closer to the center of the wheel, improving rotational precision.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThis also reduces the load on the bearings and enhances front-end rolling performance at deep steering angles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe knuckle body features a two-piece design with an upper-mounted plate. By swapping out the plate parts (HIKARU, AKIRA, Type US), you can fine-tune your setup to suit a variety of driving conditions.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e*The product comes with one knuckle base part for each side and two M2 x 5mm cap screws for mounting the plate.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e*A separate multi-select front knuckle aluminum knuckle plate is required for installation on the RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e■Plate parts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-ph?_pos=1\u0026amp;_sid=3802693d2\u0026amp;_ss=r\" title=\"REVE D MULTI-SELECT KNUCKLE PLATE (HIKARU)\"\u003eD1-MK-PH：RDX Muti-select Front Knuckle Plate (HIKARU)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-pu?pr_prod_strat=e5_desc\u0026amp;pr_rec_id=90c85d501\u0026amp;pr_rec_pid=7459698606151\u0026amp;pr_ref_pid=7459698573383\u0026amp;pr_seq=uniform\" title=\"Reve D Multi-select Knuckle Plate (Type US)\"\u003eD1-MK-PA: RDX Muti-select Front Knuckle Plate(AKIRA)\u003c\/a\u003e\u003cbr\u003eD1-MK-PU: RDX Muti-select Front Knuckle Plate(Type US)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539286036551,"sku":"D1-MK-B2","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-mkb2_1_575_380.jpg?v=1773863379"},{"product_id":"reve-d-d1-mk-pa","title":"Reve D Multi-select Knuckle Plate (AKIRA) D1-MK-PA","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eReve D Multi-select Knuckle Plate (AKIRA)(D1-MK-PA)\u003c\/p\u003e\n\u003cp\u003eAluminum Multi Select for RDX This is the aluminum knuckle plate that can be attached to the \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-b?_pos=3\u0026amp;_sid=a33308630\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan\u003efront knuckle (base part)\u003c\/span\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-b2?pr_prod_strat=e5_desc\u0026amp;pr_rec_id=58d341a4c\u0026amp;pr_rec_pid=7459698475079\u0026amp;pr_ref_pid=7459698442311\u0026amp;pr_seq=uniform\"\u003efront knuckle (2.0mm offset, base part) \u003c\/a\u003e! The “AKIRA” design, named after Team Rêve D's Akira Tayui, achieves both sharpness at the start of the drift and steering effectiveness during the drift, improving road-holding performance by adjusting the kingpin angle and trail. It achieves front roll that better utilizes the RDX's ※Use of this product requires a separate aluminum  \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-b?_pos=3\u0026amp;_sid=a33308630\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003emulti-select front knuckle for D1-MK-B RDX (base part)\u003c\/a\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e  or \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-d1-mk-b2?pr_prod_strat=e5_desc\u0026amp;pr_rec_id=58d341a4c\u0026amp;pr_rec_pid=7459698475079\u0026amp;pr_ref_pid=7459698442311\u0026amp;pr_seq=uniform\" target=\"_blank\" rel=\"noopener\"\u003emulti-select front knuckle for D1-MK-B2 RDX (2.0mm offset, base part)\u003c\/a\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b2\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e . (Note) When using with RDX, it is necessary to convert the steering tie rod into a turnbuckle. It cannot be used with the kit's genuine resin tie rod.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539286102087,"sku":"D1-MK-PA","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-mk-pa_1_575_380.jpg?v=1774888912"},{"product_id":"reve-d-d1-mk-ph","title":"Reve D Multi-select Knuckle Plate (HIKARU)","description":"\u003cp\u003eREVE D MULTI-SELECT KNUCKLE PLATE(HIKARU)(D1-MK-PH)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the first aluminum knuckle plate that can be attached to\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003e the aluminum multi-select front knuckle (base part) for RDX\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e! This product is named after Team Rêve D's \"Hoshi Hikaru\", who is known for his sharp swing and overwhelming drift speed when racing through corners. By attaching it to the aluminum multi-select front knuckle for RDX, you can achieve sharp driving and deep drift turns like Hoshi Hikaru.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease try the aluminum knuckle plate (HIKARU) that will transform the driving of your RDX into a more aggressive one!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*To use this product, you will need to purchase\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003e the D1-MK-B aluminum multi-select front knuckle for RDX (base part)\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e(Note) When using with RDX, the steering tie rod needs to be converted to a turnbuckle. It cannot be used with the original plastic tie rod of the kit.\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539286134855,"sku":"D1-MK-PH","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-mk-ph_575_380-575x380.jpg?v=1772828469"},{"product_id":"reve-d-d1-mk-pu","title":"Reve D Multi-select Knuckle Plate (Type US)..","description":"\u003cp\u003eReve D Multi-select Knuckle Plate (Type US)(D1-MK-PU)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAluminum Multi Select for RDX This is the aluminum knuckle plate that can be attached to the \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003efront knuckle (base part)\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e or \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b2\" rel=\"noopener\" target=\"_blank\"\u003efront knuckle (2.0mm offset, base part)\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e ! \u003c\/span\u003e\u003cspan\u003eThe “Type US” is designed with an emphasis on cornering angle, which is effective for drifting along walls, a common overseas theme. \u003c\/span\u003e\u003cspan\u003eThe tie-rod mounting position is designed to prevent excessive increases in EPA on the transmitter even when the steering angle is increased. \u003c\/span\u003e\u003cspan\u003eThis minimizes Ackermann changes at deeper steering angles, achieving both front end roll at steeper drift angles and increased speed when exiting corners. \u003c\/span\u003e\u003cspan\u003e*Use of this product requires a separate aluminum  \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b\" rel=\"noopener\" target=\"_blank\"\u003emulti-select front knuckle for D1-MK-B RDX (base part)\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e or \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/teamreved.com\/product\/d1-mk-b2\" rel=\"noopener\" target=\"_blank\"\u003emulti-select front knuckle for D1-MK-B2 RDX (2.0mm offset, base part)\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e . \u003c\/span\u003e\u003cspan\u003e(Note) When using with RDX, it is necessary to convert the steering tie rod into a turnbuckle. It cannot be used with the kit's genuine resin tie rod.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539286167623,"sku":"D1-MK-PU","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/d1-mk-pu_1_575_380.jpg?v=1772828286"},{"product_id":"reve-d-m1-631","title":"Reve D REVE D MC-1 ALUMINUM TOP SHAFT (M1-631)","description":null,"brand":"6","offers":[{"title":"Default Title","offer_id":42539291639879,"sku":"M1-631","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/m1-631_575_380-575x380.jpg?v=1774889980"},{"product_id":"reve-d-rc-cl-120","title":"Reve D Alu. Collar (3×6, 12mm, 2pcs.)","description":"\u003cp\u003eREVE D ALU. COLLAR(3×6, 12mm, 2pcs.)(RC-CL-120)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eΦ3×Φ6, 12mm aluminum collar.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn addition to being used as a general-purpose part, it can also be used as a spare part when attaching the\u003c\/span\u003e\u003cspan\u003e D1-BFS02 Black FRP side deck \u003c\/span\u003e\u003cspan\u003eRDX to the genuine resin main chassis of the RDX kit.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2pcs.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539296424007,"sku":"RC-CL-120","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rc-cl-120_575_380-575x380.jpg?v=1775663942"},{"product_id":"reve-d-rd-007-6","title":"Reve D ALUMINUM SPRING RETAINER 6MM (2 PIECES) (RD-007-6)","description":"\u003cp\u003eREVE D ALUMINUM SPRING RETAINER 6MM (2 PIECES) (RD-007-6)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTeam RêveD has been testing and developing this new product on various road surfaces with awesome results!\u003cbr\u003eWe have a new spring seat that suppresses spring vibration and demonstrates suspension performance more directly with the adoption of a new designed “outer guide”!\u003c\/p\u003e\n\u003cp\u003eThe lineup is available in 4 types:  0mm, + 2mm and + 4mm + 6mm.\u003cbr\u003eIn addition to the 0mm type, which is the same height as the genuine YD-2 series down retainer, + 2mm type and + 4mm type and +6mm type are also available.\u003cbr\u003eIn particular, + 2mm and + 4mm and +6mm increase the spring position to positively induce chassis roll and improve side grip without compromising traction performance.\u003c\/p\u003e\n\u003cp\u003eThoroughly lightened design by lightening process not only improves suspension performance by reducing unsprung load, but also can be used as a dress-up item.\u003cbr\u003ePlease try the aluminum spring retainer that is perfect for the Rêve D spring series.\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539300945991,"sku":"RD-007-6","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/hp_3-575x380_1.jpg?v=1772826239"},{"product_id":"reve-d-rd-012p1s","title":"Reve D REVE D ALUMINUM REAR HUB CARRIER PLATE FOR RD-012S (SE PROCESSING) (RD-012P1S)","description":"\u003cp\u003eREVE D ALUMINUM REAR HUB CARRIER PLATE FOR RD-012S (SE PROCESSING)(RD-012P1S)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is Upper arm mounting plate which is the separate items in a set of\u003c\/span\u003e\u003cspan\u003e \u003ca rel=\"noopener\" href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-rd-012s?_pos=3\u0026amp;_sid=8825c24b3\u0026amp;_ss=r\" target=\"_blank\"\u003eRD-012S [Aluminum Rear Hub Carrier Set (SE Processing) for RWD Drift Car]\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e, 2 pieces\/set (left and right common products).\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539302158407,"sku":"RD-012P1S","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-012s_575_380_5-575x380_1.jpg?v=1778530329"},{"product_id":"reve-d-rd-012psb","title":"Reve D Rear Hub Carrier Plate for RD-012S","description":"\u003cp\u003eReve D Rear Hub Carrier Plate for RD-012S(RD-012PSB)\u003c\/p\u003e\n\u003cp\u003eA new rear hub carrier plate for RD-012S is now available! In addition to the same hole positions as the existing rear hub carrier plate for RD-012S, a new service hole has been added to the bottom of the plate for the practical set up. If using an RDX away bar, enable to set the lever ratio to 1 by attaching a ball end to this hole position, and also possible to attach balance weights around the rear hub carrier to use when adjusting traction. Please try the rear hub carrier plate for \u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-rd-012s?_pos=3\u0026amp;_sid=8825c24b3\u0026amp;_ss=r\"\u003eRD-012S\u003c\/a\u003e (compatible with RDX sway bar lever ratio 1), which is practical for setting up the rear suspension!\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539302191175,"sku":"RD-012PSB","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-012psb_6000_4000.jpg?v=1772826187"},{"product_id":"reve-d-rd-012s","title":"Reve D REVE D ALUMINUM REAR HUB CARRIER SET FOR RWD DRIFT (SE PROCESSING)","description":"\u003cp\u003eREVE D ALUMINUM REAR HUB CARRIER SET FOR RWD DRIFT (SE PROCESSING)(RD-012S)\u003c\/p\u003e\n\u003cp\u003eWe are excited to introduce our new aluminum rear hub carrier that can be set according to the rear weight of your machine!\u003cbr\u003eThe new optional parts enable you to adjust the roll center by offering two outer suspension pin positions, it’s now possible to find the best set-up according to the rear weight of the machine.\u003cbr\u003e♦Outer pin upper hole\u003cbr\u003eLowering the roll center triggers more roll, making it easier to gain lateral grip even on machines with low rear weight.\u003c\/p\u003e\n\u003cp\u003e♦Outer pin lower hole\u003cbr\u003eRaising the roll center, excessive roll is suppressed even on machines with heavy rear weight,\u003cbr\u003e\u003cspan\u003eNote) The lower suspension arm may touch depending on the shape of the wheel to be installed. In that case, make adjustments to the wheel with lightly sanding the part that hits it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe hub carrier body has an innovative grooved design that gives it both rigidity and supple ness in the right places, dramatically improving traction and performance.\u003cbr\u003eThe hub carrier body, which has been boldly hollowed out, has both rigidity and flexibility, and dramatically improves traction performance, while maintaining the highest performance.\u003cbr\u003eThe addition of shiny edges has made it even more luxurious.\u003cbr\u003eCheck out his aluminum rear hub carrier that improves rear traction and ownership!\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539302355015,"sku":"RD-012S","price":64.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-012s_575_380-575x380.jpg?v=1772826148"},{"product_id":"reve-d-rd-018","title":"Reve D Aluminum servo mount (Shine Edge spec \/ 2pcs) (RD-018)","description":"\u003cp\u003eREVE D ALUMINUM SERVO MOUNT (Shine Edge spec \/ 2pcs)(RD-018)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn aluminum servo mount with SE processing (shining edge processing) that is full of luxury and ownership.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLightweight \/ high-rigidity aluminum material has been lightened to the utmost limit to achieve a weight of approximately 1.1g per piece while maintaining rigidity\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e. an effective part for more accurately demonstrating the ability of the servo and reducing the weight of the machine.\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539303862343,"sku":"RD-018","price":18.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-018.jpg?v=1772826114"},{"product_id":"reve-d-rd-022-26","title":"Reve D HT Rear Lower Sus-arm (42mm, 2.6D)","description":"\u003cdiv id=\"product_tabs\" class=\"tabbable product-tab-mode\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"box-description\"\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eREVE D HT REAR LOWER SUSPENSION ARM (42mm, 2.6D)(RD-022-26)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIntroducing the HT rear lower arm that brings the best rear traction!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe HT rear lower arm, which is machined from lightweight and highly rigid DURACON (POM) material, achieves a highly precise finish and dramatically smooth suspension movement.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLength is 42mm and has a caster angle of 2.6 degrees with an inclination on the outer pin side.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe 42mm caster 2.6 degrees type can increase traction without hindering the sinking of the suspension by tilting the knuckle forward without adding a skid angle.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe especially recommend using it in combination with the \u003ca href=\"https:\/\/teamreved.com\/news\/2023082502\" rel=\"noopener\" target=\"_blank\"\u003elong type suspension mounts (#8\/#9, type TK#8\/#9)\u003c\/a\u003e that are on sale at the same time. Please try the HT rear lower arm that achieves the best traction performance!\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539304026183,"sku":"RD-022-26","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-020-021_575_380-575x380.jpg?v=1772826068"},{"product_id":"reve-d-rd-300b","title":"Reve D Sus-Mount Ball (4pcs.) (RD-300B)","description":"\u003cp\u003eREVE D SUS-MOUNT BALL (4pcs.)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is a suspension mount ball used when inserting a suspension pin into a suspension mount.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease use it as a replacement part.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e4 pieces included\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539304321095,"sku":"RD-300B","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-300b.jpg?v=1779827298"},{"product_id":"reve-d-rd-300bs","title":"Reve D REVE D MOLDED SUSPENSION MOUNT BUSHINGS","description":"\u003cp\u003e\u003cspan\u003eREVE D MOLDED SUSPENSION BUSHINGS (RD-300BS)\u003c\/span\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539304550471,"sku":"RD-300BS","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-300bs_575_380-575x380.jpg?v=1772826031"},{"product_id":"reve-d-rd-301-1","title":"Reve D Alu. Suspension Mount #1 (39.2~42.4mm) SE (RD-301-1)","description":"\u003cp\u003e\u003cspan\u003eThe lightweight and highly rigid aluminum suspension mount series SE(Shiny Edge) spec!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe lineup includes a total of 7 types, from #1 with the shortest length of 39.2mm to #7 with the longest length of 64.0mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe aluminum suspension mount, which is lightweight yet highly rigid, does not cause alignment changes even when a load is applied while driving, and the suspension movement is more precise, achieving stable traction.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e＜Line-up＞\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-1：Alu. Suspension mount＃1（39.2～42.4mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-2：Alu. Suspension mount＃2（42.8～46.0mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-3：Alu. Suspension mount＃3（46.4～49.6mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-4：Alu. Suspension mount＃4（50.0～53.2mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-5：Alu. Suspension mount＃5（53.6～56.8mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-6：Alu. Suspension mount＃6（57.2～60.4mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e◆RD-301-7：Alu. Suspension mount＃7（60.8～64.0mm）\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e※ Please use the dedicated suspension bush, \u003c\/span\u003e\u003ca href=\"https:\/\/slidelabsdrift.com\/products\/reve-d-rd-300bs?_pos=1\u0026amp;_sid=c71f01351\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003eRD300-BS (Plastic suspension mount bush)\u003c\/a\u003e\u003c\/p\u003e","brand":"6","offers":[{"title":"Default Title","offer_id":42539305173063,"sku":"RD-301-1","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/files\/rd-301_575_380-575x380_2.jpg?v=1780677489"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/5569\/7735\/collections\/reve_d_lgo.jpg?v=1766178175","url":"https:\/\/slidelabsdrift.com\/collections\/rdx-upgrades-and-parts.oembed?page=4","provider":"SlideLabs","version":"1.0","type":"link"}